Only 3 days later, gateway 3ds team released another new GW 3.2.1 ultra firmware.
With the new firmware, it added blue card GW-installer.nds with new 3ds support,
it is more easier to use the gateway 3ds card now.
And we’re back with another quick update!
So what’s new this time:
– Updated Blue Card GW_INSTALLER.nds with New 3DS support
– Added option to boot into SYSNAND mode directly even with EMUNAND on SD card
We received plenty of feedback regarding our previous firmware release and we heard you!
In our last release we realised there was no easy way to boot into SYSNAND mode, so we got you covered now!
From now on, while in the Gateway menu with the boot icons visible, simply hold B while booting into Gateway mode or Classic mode!
You will then be asked to confirm booting into SYSNAND mode by pressing X.
We also added the New 3DS support to the Blue Card GW_INSTALLER.nds, so you have another alternative to reinstalling NVRAM other than from our Gateway menu.
About one more month quiet, gateway 3ds team released latest new firmware just now!
Please check the news from gateway 3ds official support site:
Today we are back with another update: GATEWAY 3.2 ULTRA!
So let’s see what’s new:
– Latest EMUNAND support for old 3DS (currently version 9.7)
– New 3DS 8.1 JAPAN region now fully supported (multirom menu and so on)
– System Settings 4.5 support for New 3DS!
– Built-in NVRAM installer in the Gateway menu (behaves same as the Blue Card Gateway installer)
From now on, New 3DS users can rejoice that they no longer need to constantly use Cubic Ninja or Zelda Ocarina of Time to boot up into Gateway mode!
With this firmware update, you will be able to boot into Gateway mode using just System Settings, just like on old 3DS! No more extra accessories required once you have done the setup!
Just follow these simple steps:
1) Copy the Gateway 3DS 3.2.0 ULTRA Launcher.dat to your New 3DS microSD card
2) Copy mset_.cia to your New 3DS microSD card (where is your console region)
3) Copy “DevMenu.3ds” to your Gateway 3DS microSD card.
4) Boot into the Gateway menu with your preferred entrypoint (Zelda or Cubic Ninja)
5) Select the new “NVRAM INSTALL” option from the menu, proceed with installation.
6) Once installed, boot into Gateway mode and launch DevMenu.3ds from the multirom menu (press SELECT)
7) Start DevMenu and import mset_.cia from your SD card.
8) Reboot console and verify you can now boot into Gateway mode with the classic System Settings DS Profile method. (Settings -> Profile -> Nintendo DS profile)
9) Enjoy! No more cartridge swapping required to use Gateway 3DS on New 3DS!
!! IMPORTANT !!
Please make sure to install the *CORRECT* mset cia for your region, we do not recommend this for new users with little experience !!
Please be aware that this downgrades the System Settings application on your SYSNAND, so be wise and
backup your SYSNAND (and setup EMUNAND) using the Gateway menu before you do this.
Note you can always manually install a newer CIA version back of System Settings, but using our Sysnand Restore option is the recommended option.
New 3DS users might also wonder why there is no EMUNAND update yet, and the answer is simply that while we are still making steady progress on this front, there is still alot of work to be done until we get to this point. So we hope our New 3DS users will understand that we cannot give an exact end date for this yet.
Rest assured we will be able to overcome this obstacle!
Just new the news from Gateway 3DS official support site, gateway team public released ultra V3.1.0 beta to add support new 3DS V9.2 firmware support.
In the before gateway ultra firmware can only support V4.1-V9.2.x 3DS(XL/LL) , can’t support new 3DS.
with the new ultra V3.1.0 firmware, now you can use gateway 3ds card to play 3ds roms on your 3DS (XL/LL) and new 3DS(XL/LL) for free, without game limit, just drop and play, easier to select roms from game menu …
for the following is the gateway 3ds newest function list:
Every feature of the GATEWAY experience on the original 3DS is supported on New 3DS, such as but not limited to:
– 100% game compatibility
– Multirom menu
– Gateway and Classic mode
– Emunand !
– Eshop application support AND Eshop ROMs support
– Homebrew support
– Savegame backup and restore
– Gamecard dumping
– System nand dumping
– EXFAT and FAT32 support
– And many more features
We have spent months trying to find an alternative method that did not require you to have anything extra for New 3DS similar to our original 3DS solution, but we now realise that we should just have released what we have and improve it iteratively!
And that’s exactly what we are doing! We polished our current solution and made it into something we would feel comfortable with to release as a beta.
Keep in mind that finding a more convenient solution for our New 3DS users will remain a priority task to us.
We decided to release this as a public beta, so if you find any serious issues, please let us know.
Our current New 3DS solution is still a work in progress but it is a fully WORKING solution and that’s all that matters currently.
Currently we know there are a few minor issues in our release but we feel these are not serious show stopper bugs to put this beta release on hold.
One example is the paused head tracking and the 3D slider switching incorrectly between 2D and 3D when in Gateway or Classic mode.
But rest assured, we are working on fixing these bugs!
NEW 3DS INSTALL QUICKSTART GUIDE by gateway 3ds
– A save dongle OR a friend with a original 3DS that can launch our Gateway menu
– A genuine physical gamecard copy of “The Legend Of Zelda: Ocarina Of Time 3D”
– Gateway 3.1.0 ULTRA Launcher.dat file
1. Drag and drop the Gateway 3.1.0 ULTRA Launcher.dat file to your New 3DS’s internal microSD card, behind the back plate.
2. Locate the savegame for “The Legend Of Zelda: Ocarina Of Time 3D” for your region in the Gateway 3.1.0 ULTRA release.
3. Restore the savegame to the game: you can either use a generic savegame dongle OR use our Gateway menu’s Restore savegame option with a original 3DS from a friend.
4. Boot up the New 3DS and launch the Zelda game.
5. Select the GATEWAY savegame and Link will be standing inside a tree hut.
6. Simply press A to load the Gateway menu.
You will be greeted with the Gateway menu, and from there you can insert the Gateway card and boot into Gateway mode.
NOTE: We are also working on using Cubic Ninja as a means to load our Gateway menu, please stay tuned for more information soon!
Support the innovators not the imitators, and as always ENJOY!
As we known, Nintendo 3DS newest firmware updated to V9.5 , then gateway 3DS team followed their step and released the newest Ultra V3.0.4 beta firm to emunand 9.5, to let players use all features of Nintendo 9.5 features.
The following is the news from Gateway 3DS official support site:
Today we present just a quick update for our users with 9.5 emunand. This fixes the multirom menu not showing up and various updates for properly supporting 9.5 emunand.
We also want to inform our users about some news regarding emunand support for the New 3DS:
We will not be able to support emunand 9.5 or higher for a while on the New 3DS. This is only an issue for the New 3DS, the old 3DS and 2DS will never have this issue. This is not a definitive barrier, but we feel it necessary to inform our users that while we are still working on releasing our New 3ds support, we will not be able to provide support yet for 9.5 emunand or higher for New 3DS on release
After several month hard working, gateway team released the newest Ultra V3.0 firmware finally.
Now, you can only use Gateway 3DS red (only one card, don’t need blue card) on V4.1-V9.2.x to run all 3DS roms for free !
Gateway 3DS Ultra V3.0 Play All 3DS roms on V4.10V9.2.x 3DS
We just tested the gateway V3.0 firmware on our v9.2.0-10u 3DS , it is so easy to use and works great!
We wrote a step by step user manual to help our users to run new V3.0 firmware.
To use Gateway 3DS ultra V3.0 is very easy ,
just follow the following several steps:
(1)Go to gateway 3DS officia support site to download V3.0 firmware:
(2)unzip it, copy “Launcher.dat” to the root of your SD card(big card);
(3)Download 3DS roms and copy the roms to microSDHC memory card(small card):
(4)insert microSDHC memory card(small card) to Gateway red card
(5)insert gateway red to card to 3DS
(6)power on your 3DS
(7)Connect to WiFi
(8) launch browser
(9)Clear history and cookies
(10)Go to go.gateway-3ds.com
(11) then you will gateway menu screen
(12) go back to home, and press “select” button
(13) You will see game list menu, choose the game and enjoy!
We aslo did a simple video to show you how to use the gateway 3DS ultra V3.0, please check it:
Just get the news from Gateway 3DS official site, they will release the new firmware support 3DS firmware from V7.x-V9.2.x.
Before, they only push the message that they only support V9.0.x-V9.2.x.
Now, they will release new firmware can support all 3DS consoles from V7.x-V9.2.x,
means more 3DS owners can use gateway 3ds very soon.
So now, please don’t update your 3DS above V9.2 and wait the new firmware.
The following message from gateway 3ds official support site:
We know many Gateway 3DS users are eagerly anticipating our upcoming native firmware support for Systems over 4.5 up to 9.2.
We have currently implemented support for firmware versions 7.0 until 9.2 and adding support for lower versions every day.
We apologize for the delay but want to reassure our users that it will be released soon.
Our proven policy is not to rush a product for a quick shameless buck, but to release highly featured updates which are also future proof. All Gateway owners have been enjoying our product for up to 18 months now and none of them regret their purchase. The same will remain for new users who we are sure will enjoy their Gateway, probably for the lifetime of their console.
Thank you for your support and we ask you for just a little more patience, our release is now just around the corner.
Recently, Nintendo update 3DS firmware frequent, from V9.2.x to V9.3.x ,then to V9.4.x .
Gateway team isn’t free too, they are working hard on V9.0-V9.2 firmware, and just now, release the OMEGA 2.7 firmware.
The following news is from Gateway 3DS official support site:
Today we present another quick update for our 4.5 users: Gateway OMEGA 2.7 which brings support for emunand 9.4!
We also want to inform our users that we are still working on native support for sysnand 9.0 – 9.2, so please be patient until we are ready to release!
We try to deliver a smooth experience for our users and this takes time to perfect!
We also inform our users that they MUST NOT UPDATE SYSNAND TO 9.3 OR ABOVE, because we will not be able to support entry to those sysnand versions any time soon.
If you are wondering what native support we will bring for lower than sysnand 9.0, we can tell that after 9.0-9.2 we will start with 8.0-8.1 and gradually work our way down with support for even lower sysnand firmware versions.
[Download Gateway Omega 2.7]
Gateway team work hard on V9.2.x 3ds firmware all the time, from the former news,
they will release new firmware very soon.
Now , only several days before xmas, will they give us a Xmas surprise?
I think they will do!
Currently, gateway 3ds official site www.gateway-3ds.com is still under maintenance,
but please attention: they changed the top banner, it is a banner different with the OMEGA.
So, will they remove OMEGA firmware? and use a new firmware and support V9.2.x directly?
If all is same as we guess, Gateway 3ds new firmware will release in 2 Days i think!
Just get the news from Gateway 3DS team, they released an video to show Gateway 3DS Card can work on new 3DS console. So, i think it will not wait to long to release the new firmware to support V9.x 3DS firmware, following is the original news from Gatewa Team:
Ladies and gentlemen, as they say.. a picture speaks a thousand words! That must mean a video speaks a few million words, right? Without further ado, today we show you Gateway 3DS working on the New Nintendo 3DS.
Gateway 3DS working on the New Nintendo 3DS video:
Here is an exciting news from Gateway 3DS Team – Gateway 3DS card can support 3DS V9.0.x-V9.2.x Now!
That means you can use gateway card on the newest 3DS firmware, it supports New 3DS, 3DS XL/LL, 2DS !
As you know, recently some new cards released, such as the SKY3DS, R5SDHC, K3DS, the 3 cards can work on the newest V9.2.x 3DS firmware,
but they are limited only 10 3DS games, and the price is very expensive.
Now, gateway 3ds can supports 3DS V9.0.x-V9.2.x with unlimited 3ds roms, and much cheaper price.
So, if you are ready to buy a flashcarts for your 3DS,
Gateway 3DS is still your best choice!
The following is the original news from Gateway Team:
We recently reached a major milestone and now we are happy to announce that we are in the process of finalizing our support for 3DS systems running System Firmware 9.0.0-20 / 9.1.0-20J / 9.2.0-20 natively!
Yes, this includes 2DS and New 3DS!
Yes, you heard us right! If you have a 3DS, or a 2DS or a New 3DS system that is running System Firmware 9.0.0-20, 9.1.0-20J or 9.2.0-20 then you WILL be able to use it with Gateway 3DS!
We recommend the following to our interested users:
- If you are on native System Firmare 4.5, then please stay at this version.
- If you are on native System Firmware 5.0 or higher, then please update to 9.0.0-20, 9.1.0-20J or 9.2.0-20 and stay on this version. Do not update beyond this version.
But we also need help from YOU our loyal users!
We need you to get the word out to your community, friends and family that they must not update their 3DS beyond the version we recommended above!
We cannot guarantee that our solution will keep working with future updates above 9.2.0-20!